Changes of State | Matter | Physics | FuseSchool
From Pamela Silberman
views
comments
Changes of State | Matter | Physics | FuseSchool
On Earth, materials exist in one of three main states of matter: solid, liquid or gas.
Materials can change between these states. When a state change occurs, a substance’s properties will also change. However, if the state change is reversed the substance will recover the properties it had to begin with. Matter can transition between the three states when heated or cooled. But why is heat key in all this?
When a material is heated, it absorbs heat energy. This additional energy can cause attractive forces between molecules to break. This leads to rearrangements of the particles because the attractive forces no longer hold them together as tightly. The same happens when a liquid is heated. The attractive forces between the molecules break, leading them to become more widely dispersed and a gas to form.
Do you know the difference between evaporation and boiling? Both are when a substance transforms from a liquid to a gas. Think of a boiling pan of water… all of the water bubbles. This is because all of the particles have enough energy to become gaseous. But water standing in a pan that is not being heated by anything other than the environment, can also turn into a gas - this is evaporation. Only the particles at the surface have enough energy to change from liquid to gas. Hence, evaporation is a slower process than boiling even though it achieves the same state change. Both are types of vaporisation.
The opposite of these vaporisation processes is condensation: the transition from gas to liquid. Think of a cold can of soda on a hot day - those water droplets on the outside. Or the dew on the grass in the morning. Or the steamed-up mirror after a hot bath. Even the clouds in the sky. Or a foggy windscreen on a car. These are all examples of condensation. Water vapour in the air has cooled down to form liquid droplets of water.
Now let’s think about the transitions between solids and liquids: so, melting and freezing. Think of the Arctic sea ice. In the summer when air temperatures are warmer, more heat energy is absorbed by the ice. This causes bonds to break between the ice’s water molecules and the ice starts to melt. The solid ice becomes liquid water. But in the winter, the air temperatures are colder and so seawater freezes and the ice starts to form again. There is less heat energy within the ice, and so more bonds can form, holding it together as solid ice
.
Did you know that sometimes when solids are heated they can turn straight into gases? This is called sublimation. This is only demonstrated by particular materials such as solid carbon dioxide (AKA ‘dry ice’). When subjected to a certain pressure it will turn straight into gaseous carbon dioxide. Liquid carbon dioxide does exist but it only occurs under very high pressures.
Similarly, gases can turn straight into solids when cooled. This is called deposition.
Our final thing to discover is that when a material changes states the mass stays the same. The density changes - so the mass per unit volume. But the mass does not change. Our glass of nice, cold coke weighs the same whether the ice is solid or when the ice has melted.
So, there we have the changes of state. Just remember that the mass stays the same, whatever the state!
SUPPORT US ON PATREON
https://www.patreon.com/fuseschool
SUBSCRIBE to the FuseSchool YouTube channel for many more educational videos. Our teachers and animators come together to make fun & easy-to-understand videos in Chemistry, Biology, Physics, Maths & ICT.
VISIT us at www.fuseschool.org, where all of our videos are carefully organised into topics and specific orders, and to see what else we have on offer. Comment, like and share with other learners. You can both ask and answer questions, and teachers will get back to you.
These videos can be used in a flipped classroom model or as a revision aid.
Find all of our Chemistry videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlReKGMVfUt6YuNQsO0bqSMV
Find all of our Biology videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlQYSpKryVcEr3ERup5SxHl0
Find all of our Physics videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlTWm6Sr5uN2Uv5TXHiZUq8b
Find all of our Maths videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlTKBNbHH5u1SNnsrOaacKLu
Instagram: https://www.instagram.com/fuseschool/
Facebook: https://www.facebook.com/fuseschool/
Twitter: https://twitter.com/fuseSchool
Access a deeper Learning Experience in the FuseSchool platform and app: www.fuseschool.org
Follow us: http://www.youtube.com/fuseschool
Befriend us: http://www.facebook.com/fuseschool
This is an Open Educational Resource. If you would like to use the video, please contact us: info@fuseschool.org
On Earth, materials exist in one of three main states of matter: solid, liquid or gas.
Materials can change between these states. When a state change occurs, a substance’s properties will also change. However, if the state change is reversed the substance will recover the properties it had to begin with. Matter can transition between the three states when heated or cooled. But why is heat key in all this?
When a material is heated, it absorbs heat energy. This additional energy can cause attractive forces between molecules to break. This leads to rearrangements of the particles because the attractive forces no longer hold them together as tightly. The same happens when a liquid is heated. The attractive forces between the molecules break, leading them to become more widely dispersed and a gas to form.
Do you know the difference between evaporation and boiling? Both are when a substance transforms from a liquid to a gas. Think of a boiling pan of water… all of the water bubbles. This is because all of the particles have enough energy to become gaseous. But water standing in a pan that is not being heated by anything other than the environment, can also turn into a gas - this is evaporation. Only the particles at the surface have enough energy to change from liquid to gas. Hence, evaporation is a slower process than boiling even though it achieves the same state change. Both are types of vaporisation.
The opposite of these vaporisation processes is condensation: the transition from gas to liquid. Think of a cold can of soda on a hot day - those water droplets on the outside. Or the dew on the grass in the morning. Or the steamed-up mirror after a hot bath. Even the clouds in the sky. Or a foggy windscreen on a car. These are all examples of condensation. Water vapour in the air has cooled down to form liquid droplets of water.
Now let’s think about the transitions between solids and liquids: so, melting and freezing. Think of the Arctic sea ice. In the summer when air temperatures are warmer, more heat energy is absorbed by the ice. This causes bonds to break between the ice’s water molecules and the ice starts to melt. The solid ice becomes liquid water. But in the winter, the air temperatures are colder and so seawater freezes and the ice starts to form again. There is less heat energy within the ice, and so more bonds can form, holding it together as solid ice
.
Did you know that sometimes when solids are heated they can turn straight into gases? This is called sublimation. This is only demonstrated by particular materials such as solid carbon dioxide (AKA ‘dry ice’). When subjected to a certain pressure it will turn straight into gaseous carbon dioxide. Liquid carbon dioxide does exist but it only occurs under very high pressures.
Similarly, gases can turn straight into solids when cooled. This is called deposition.
Our final thing to discover is that when a material changes states the mass stays the same. The density changes - so the mass per unit volume. But the mass does not change. Our glass of nice, cold coke weighs the same whether the ice is solid or when the ice has melted.
So, there we have the changes of state. Just remember that the mass stays the same, whatever the state!
SUPPORT US ON PATREON
https://www.patreon.com/fuseschool
SUBSCRIBE to the FuseSchool YouTube channel for many more educational videos. Our teachers and animators come together to make fun & easy-to-understand videos in Chemistry, Biology, Physics, Maths & ICT.
VISIT us at www.fuseschool.org, where all of our videos are carefully organised into topics and specific orders, and to see what else we have on offer. Comment, like and share with other learners. You can both ask and answer questions, and teachers will get back to you.
These videos can be used in a flipped classroom model or as a revision aid.
Find all of our Chemistry videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlReKGMVfUt6YuNQsO0bqSMV
Find all of our Biology videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlQYSpKryVcEr3ERup5SxHl0
Find all of our Physics videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlTWm6Sr5uN2Uv5TXHiZUq8b
Find all of our Maths videos here: https://www.youtube.com/playlist?list=PLW0gavSzhMlTKBNbHH5u1SNnsrOaacKLu
Instagram: https://www.instagram.com/fuseschool/
Facebook: https://www.facebook.com/fuseschool/
Twitter: https://twitter.com/fuseSchool
Access a deeper Learning Experience in the FuseSchool platform and app: www.fuseschool.org
Follow us: http://www.youtube.com/fuseschool
Befriend us: http://www.facebook.com/fuseschool
This is an Open Educational Resource. If you would like to use the video, please contact us: info@fuseschool.org
- Tags
-